Operators Manual
Operation
M55-ML3-UG, Rev A
34
The Licensing page contains licensing information. To add new licenses, contact Vislink Customer
Service and provide the MAC Address from the information page. Customer Service will provide a
Key Number. Place the Key Number in the space provided and hit enter. Your product will now be
licensed.
8.5. Telemetry
The ML3’s telemetry allows you to remote control and camera control using the Vislink
Focal point kit and the integrated 920Mhz Telemetry Radio.
8.5.1. Equipment Required
The MLT3 Camera Control and/or Remote Control Operates with the Vislink Focal Point
Transceiver. The Transceiver options include:
• Fiber Connector Type
o SC/APC
o LT/UPC
o ST/UPC
o SC/UPC
o FC/UPC
• Power Options
o Wall Wart AC Mains
o Gold Mount Battery
o V-Clip Battery
Table 5: Focal Point Telemetry Radio Selection
Focal Point Outdoor Unit SC/APC 410-490MHz/900MHz
Focal Point Outdoor Unit SC/APC 410-490MHz/900MHz &
IDX
Focal Point Outdoor Unit SC/APC 410-490MHz/900MHz &
A/B
Focal Point Outdoor Unit LC/UPC 410-490MHz/900MHz
Focal Point Outdoor Unit LC/UPC 410-490MHz/900MHz &
IDX
Focal Point Outdoor Unit ST/UPC 410-490MHz/900MHz
Focal Point Outdoor Unit ST/UPC 410-490MHz/900MHz &
IDX
Focal Point Outdoor Unit ST/UPC 410-490MHz/900MHz &
A/B
Focal Point Outdoor Unit SC/UPC 410-490Mhz/900MHz
Focal Point Outdoor Unit SC/UPC 410-490MHz/900MHz &
IDX
Focal Point Outdoor Unit SC/UPC 410-490MHz/900MHz &
A/B
Focal Point Outdoor Unit FC/UPC 410-490MHz/900MHz
Focal Point Outdoor Unit FC/UPC 410-490MHz &
A/B/900MHz
Focal Point Outdoor Unit SC/UPC 410-490MHz/900MHz
(Dual Serial)
Focal Point Outdoor Unit SC Serial to Fiber Connector
To Next Page
Loading...
General