OPERATING THE POWERMASTER SYSTEM
14 D-307502 PowerMaster-10/30 G2 User's Guide
Chime ON/OFF
Disable / enable the chime zones (see Appendix C) by alternate clicking of the key, as shown below:
CHIME indicator lights steadily when “chime on” is selected.
Note: For UL Listed Product, the Chime setting must be set to “Chime ON”.
Adjusting the Speech Volume
and the Volume of the Keypad Beeps
The following diagrams show how to increase or decrease the loudness by clicking the <1> or<4> key
(assuming that the volume was at minimum/maximum to begin with).
Refers to PowerMaster-30 G2 with voice option only
To Next Page
Loading...
Need help?
General