SPEECH AND SOUND CONTROL
16 D-307502 PowerMaster-10/30 G2 User's Guide
Once the last of the boxes disappears, RECORDING ENDED will be displayed.
When you release the button, the display will revert to the normal status-displaying mode, but will also indicate
that a message is waiting. For example:
To check your own message, listen to it within one minute from the end of recording (see the next section -
Message Playback). This way the MSG indication will not be erased.
Message Playback
To listen to a message left by another user of the system:
Click
and listen. PLAY will be displayed and the message will be played back over the built-in
loudspeaker. When the playback ends, the display will revert to the normal status-displaying mode. If more than
1 minute elapsed after recording, the MSG indication will disappear.
To Next Page
Loading...