Visonic PM-10 TRIPLE User Manual

EVENT REPORTING & CONTROL BY TELEPHONE AND SMS
50 D-307502 PowerMaster-10/30 G2 User's Guide
B.16 Serial Number
The SERIAL NUMBER menu enables reading the system serial number and similar data for support purposes only.
 Here you can read the system serial number and other relevant data.

Carefully read the section titled "Additional Information" according to the indicated references
1
etc – see
table at end of this section.
1.
SERIAL NUMBER
Enter the [USER SETTINGS] menu, select the [SERIAL NUMBER]
option and press .
1
2.
090703000
Displays the control panel serial number.
3.
JS702999 I19.412
Displays the PowerMaster-10 G2 panel software version.
or
JS702999 K19.412
Displays the PowerMaster-30 G2 panel software version.
4.
JS700421 v1.0.02
Displays the control panel keypad software version.
2
5.
Panel ID: 3061280924C5
Displays the control panel ID for PowerManage connectivity.
6.
PYTHON: █ █ █ █ █ █ █ █
Displays the GSM image transfer software version.
7.
J-703002 I19.412
Displays the PowerMaster-10 G2 panel default version.
or
J-703002 K19.412
Displays the PowerMaster-30 G2 panel default version.
8.
JS702412 K01.033
Displays the control panel boot version.
9.
JS702415 K02.036
Displays the control panel Remote Software Upgrade downloader
version.
10.
PL7.5.92.3 raw
Displays the PowerLink software version, if installed.
11.
GE864-QUAD
Displays the cellular modem type, if installed.
☺ Return to step 2
3, 4
Additional Information (section B.16)
1
For detailed instructions on how to select the Setting Options – refer to sections A.1 and A.2.
2
Refers to PowerMaster-30 G2 only
3
To end this session and return to previous menu options, press the button.
4
You can now select another option in the User Settings menu (see section A.1 and section A.2), or quit
programming (see section A.3).

Visonic PM-10 TRIPLE Specifications

General

Brand	Visonic
Model	PM-10 TRIPLE
Category	Control Systems
Language	English