Visonic PM-10 TRIPLE User Manual

EVENT REPORTING & CONTROL BY TELEPHONE AND SMS
D-307502 PowerMaster-10/30 G2 User's Guide 55
Remote Control by SMS
Note: This feature is not to be not to be enabled in UL Listed product.
PowerMaster system with GSM unit can respond to SMS commands from any cellular telephone (a detailed
SMS message sending process is described in the cellular telephone user’s guide).
The various SMS commands are detailed in the following table.
In this table, “<code>” means a 4-digit user code and simply means blank space (see Note).
SMS Command List
Command
Individual Partition SMS Format
All Partitions SMS format
1
Arm AWAY
“AWAY <code>”
or
“AW <code>”
“P# AWAY <code>”
or
“P# AW <code>”
2
Arm AWAY instant
“AWAY INST <code>”
or
“AWI <code>”
“P# AWAY INST <code>”
or
“P# AWI <code>”
3
Arm AWAY
Latchkey
“LATCHKEY <code>”
or
“LK <code>”
“P# LATCHKEY <code>”
or
“P# LK <code>”
4
Arm AWAY
Latchkey instant
“LATCHKEY INST <code>”
or
“LKI <code>”
“P# LATCHKEY INST <code>”
or
“P# LKI <code>”
5
Arm HOME
“HOME <code>”
or
“HM <code>”
“P# HOME <code>”
or
“P# HM <code>”
6
Arm HOME instant
“HOME INST <code>”
or
“HMI <code>”
“P# HOME INST <code>”
or
“P# HMI <code>”
7
Disarm
“DISARM <code>”
or
“DA <code>”
“P# DISARM <code>”
or
“P# DA <code>”
8
Turn PGM on
1
“PGM XX ON <code>”
“PGM XX ON <code>”
9
Turn PGM off
1
“PGM XX OFF <code>”
“PGM XX OFF <code>”
10
Define custom
house identity
2
“HOUSE NAME <code> <house ID>”
or
“HN <code> <house ID>”
“P# HOUSE NAME <code> <house ID>”
or
“P# HN <code> <house ID>”
11
Query system
status
“STATUS <code>”
or
“ST <code>”
“P# STATUS <code>”
or
“P# ST <code>”
Note: The PowerMaster may react with a delay to received SMS messages if a GPRS session is in progress at
the same time.
1
Refers to PowerMaster-30 G2 only
2
House ID includes up to 15 characters, for example, JOHN'S HOUSE

Visonic PM-10 TRIPLE Specifications

General

Brand	Visonic
Model	PM-10 TRIPLE
Category	Control Systems
Language	English