EVENT REPORTING & CONTROL BY TELEPHONE AND SMS
D-307502 PowerMaster-10/30 G2 User's Guide 39
EMAIL BY SERVER
A. To Program Events to be Reported by Email via the server
Enter the [USER SETTINGS] menu, select the [PRIVATE REPORT] option
and press .
1
When the display reads [VOICE REPORTS] press repeatedly until
the display reads [EMAIL BY SERVER].
To enter this option, press
. The display reads [1st E-MAIL].
Click the or button until the display reads the email you
wish to program
, for example, [2nd E-MAIL] and then press .
The display reads [Address].
Click the button. The display reads [E-MAIL Events].
The display shows the currently selected option.
Click the or button until the display reads the event group
you wish to be reported via email, for example, [alarm].
13
When you are satisfied with the setting, press to confirm.
A "Success Tune" ☺ sounds. The display confirms the set events to be
reported, and returns to step 6.
5, 15
Continue from step 4 in the previous section.
Click the or button until the display reads the email you
wish to program or edit, for example, "2nd E-Mail", and press .
When the display reads [Address], press
To program or edit the email, at the blinking cursor position enter the Email,
for example, “info@visonic.com”, using the alphanumerical keypad.
6, 7
When done, press to confirm.
A "Success Tune" ☺ sounds, the display confirms the Email and returns to
step 11.
8, 15
To Next Page
Loading...
Need help?
General