Visonic PM-10 TRIPLE User Manual

EVENT REPORTING & CONTROL BY TELEPHONE AND SMS
D-307502 PowerMaster-10/30 G2 User's Guide 45
E. To Set the OFF (Stop) Time
10.
Start-HH:MM
Click the or button until the display reads "Stop-HH:MM".
or
Stop HH:MM
When the display reads the desired setting, press to confirm.
11.
TIME 01:30P
The "stop time" of the selected operation is displayed.
5
12.
TIME 04:00P
Use the numerical keypad to set or change the operation OFF (stop) time, for
example, “04:00P”.
6
When you are satisfied with the setting, press to confirm.
☺ Return to step 5
A "Success Tune" ☺ sounds. The display confirms the saved stop time
and returns to the "operation No" screen, as in step 5.
7
Additional Information (section B.14)
1
For detailed instructions on how to select the Setting Options – refer to sections A.1 and A.2.
2
To activate the selected device on every day of the week at the same time(s), use the "Daily" option.
Otherwise, use the or buttons to select the specific day (Sunday, Monday, Tuesday…etc)
you wish to activate the PGM output. You can later repeat the process for other days of the week, if desired.
3
The display shows " operation No 1 " which is the first of the 4 ON/OFF time activations you can schedule for
the day selected in the previous step. You can later repeat the process for the other 3 activations on the
selected day, if desired.
4
Here you can select either the "start time" or "stop time" using the or button. Select the
time in 10 minute intervals only. To erase a displayed time, press the button.
The screen also displays the selected time format.
5
The display shows the current start or stop time setting of the selected activation with the cursor blinking on
the first hour digit. If no time is programmed, the time display will be blank (- -:- - - ).
6
For detailed explanation of how to set the time - refer to Section B.8 B.
7
To end this session and return to the previous "operation" menu, press the button.
To select other menu options or to quit programming, follow the instructions in sections A.2 and A.3.
Scheduler Table
Device
Device
Description
Day
Operation 1
Operation 2
Operation 3
Operation 4
PGM
Monday
ON: _ _: _ _
OFF: _ _: _ _
ON: _ _: _ _
OFF: _ _: _ _
ON: _ _: _ _
OFF: _ _: _ _
ON: _ _: _ _
OFF: _ _: _ _
PGM
Tuesday
ON: _ _: _ _
OFF: _ _: _ _
ON: _ _: _ _
OFF: _ _: _ _
ON: _ _: _ _
OFF: _ _: _ _
ON: _ _: _ _
OFF: _ _: _ _
PGM
Wednesday
ON: _ _: _ _
OFF: _ _: _ _
ON: _ _: _ _
OFF: _ _: _ _
ON: _ _: _ _
OFF: _ _: _ _
ON: _ _: _ _
OFF: _ _: _ _
PGM
Thursday
ON: _ _: _ _
OFF: _ _: _ _
ON: _ _: _ _
OFF: _ _: _ _
ON: _ _: _ _
OFF: _ _: _ _
ON: _ _: _ _
OFF: _ _: _ _
PGM
Friday
ON: _ _: _ _
OFF: _ _: _ _
ON: _ _: _ _
OFF: _ _: _ _
ON: _ _: _ _
OFF: _ _: _ _
ON: _ _: _ _
OFF: _ _: _ _
PGM
Saturday
ON: _ _: _ _
OFF: _ _: _ _
ON: _ _: _ _
OFF: _ _: _ _
ON: _ _: _ _
OFF: _ _: _ _
ON: _ _: _ _
OFF: _ _: _ _
PGM
Sunday
ON: _ _: _ _
OFF: _ _: _ _
ON: _ _: _ _
OFF: _ _: _ _
ON: _ _: _ _
OFF: _ _: _ _
ON: _ _: _ _
OFF: _ _: _ _
PGM
Daily
ON: _ _: _ _
ON: _ _: _ _
ON: _ _: _ _
ON: _ _: _ _

Visonic PM-10 TRIPLE Specifications

General

Brand	Visonic
Model	PM-10 TRIPLE
Category	Control Systems
Language	English