To Next PageTo Next Page
Need help?Do you have a question about the Visonic PowerMax Complete and is the answer not in the manual?
General| Operating Temperature | 0°C to 49°C (32°F to 120°F) |
|---|---|
| Type | Wireless Security System |
| Communication | GSM, PSTN, IP |
| Battery Life | Up to 24 hours |
| Wireless Range | 200m (open space) |
| User Codes | up to 8 |
| Event Log | 250 events |
| Remote Control | Yes |
| Siren | Built-in siren |
| Event Reporting | Contact ID, SIA |
| Compatibility | Visonic wireless devices |
Describes the PowerMaxComplete wireless alarm control system.
Details the capabilities and unique features of the system.
Specifies the manual's compatibility with system versions.
Form to record central station and contact details for assistance.
Explains the meaning of indicator lights on the control panel.
Describes the different siren sound patterns for alarms.
Provides essential advice for operating the system effectively.
Explains the function of security-related keys on the keypad.
Steps to select a specific partition for operations.
Checks system readiness before arming.
Procedure for arming the system in AWAY mode.
Procedure for arming the system in HOME mode.
How to switch arming modes without disarming.
Arming without an entry delay.
How to arm the system when zones are not secured.
Arming the system with special notification on disarming.
How to manually trigger panic, fire, and emergency alarms.
Procedures for disarming the system after an event.
How to disarm when the system reports troubles or alarms.
How to disarm the system silently in a duress situation.
Describes how the siren behaves in different alarm scenarios.
Lists keypad functions for sound and speech control.
How to adjust volume and enable/disable voice announcements.
Recording and listening to verbal messages.
How to enable or disable the chime function for zones.
Listening to messages left by other users.
Explains how to control devices via the PGM output.
Setting up automatic control based on timer or sensors.
Viewing stored alarm and tamper events.
Detailed review of specific alarm/tamper events.
Identifying and understanding system trouble indications.
Details specific trouble types like inactivity and low battery.
Display behavior when memory and trouble data coexist.
Guidance on resolving system trouble conditions.
Using the system to monitor activity for safety.
Using transmitters for emergency alerts.
Accessing the system remotely using a phone.
Lists commands for remote telephone operation.
Enabling voice communication for remote assistance.
Configuring the system to report events to private phones.
Controlling the system using SMS commands.
Explains the SMS messages sent by the system.
Procedure to test system detectors and functionality.
Steps for performing and interpreting walk test results.
Lists the various settings configurable by the user.
Steps to access the user settings menu.
Procedures for bypassing, reviewing, and recalling zone bypasses.
How to view a list of currently bypassed zones.
Re-applying a previously saved zone bypass configuration.
Setting event reporting parameters for private numbers.
How to set up master and user codes.
Detailed flow for setting, showing, and recalling bypasses.
Managing user codes and partition assignments.
Steps to add keyfob transmitters and proximity tags.
Configuring voice announcements and automatic arming.
Configuring audible feedback upon arming/disarming.
Setting system time, date, and formats.
Scheduling device start/stop activation.
Steps to add keyfob transmitters to the system.
Removing enrolled keyfob transmitters from memory.
Steps to add proximity tags to the system.
Removing enrolled proximity tags from memory.
Configuring voice announcement preferences.
Enabling or disabling automatic arming.
Configuring the time for automatic arming.
Configuring audible feedback upon arming/disarming.
Adjusting the system's clock and time format.
Adjusting the system's calendar date and format.
Scheduling device start/stop activation.
How installers access specific modes.
Explains what the event log stores and how it's displayed.
Step-by-step instructions for viewing logged events.
How to replace the system's backup battery.
How to replace batteries in wireless sensors and keyfobs.
Importance of regular tests and how to clean the control panel.
Instructions for cleaning the control panel.
Discusses system limitations and potential failure points.
Steps to select, arm, and disarm specific partitions.
Explains the meaning of partition status indicators.
Instructions for using keyfobs and keypads.
Describes how the siren behaves in different alarm scenarios.
Explains the meaning of partition status indicators.
Instructions for using the MCT-237 keyfob.
Instructions for using the MCM-140+ wireless remote.
Instructions for using the MKP-150/MKP-151 wireless keypad.
Definitions of terms used in the manual.
Guides for creating and practicing a home fire escape plan.
Regulatory compliance information for the device.
Regulatory compliance and contact information for Canada.
