J.M. Voith SE & Co. KG/VTA | Instruction Manual
Maintenance
55
-performance universal joint shaft
Instruction manual (Translation)
G853 en 07/2013, Version1
9 Maintenance
The operator's service personnel may only perform the maintenance
work and inspections described in this instruction manual. Other
maintenance work (especially overhauls) may only be performed by
the manufacturer's service personnel or personnel authorized by the
manufacturer.
DANGER
Severe to deadly injuries due to rotating parts!
Secure drive against starting up.
Keep personnel who are not participating away, e.g. using
supervisory personnel, enclosures, fences.
Do not remove any safety equipment as long as the universal
joint shaft/system is not standing still and secured against
starting up again.
Before restarting the universal joint shaft/system, reattach all
safety equipment.
DANGER
While working on the universal joint shaft of vehicles, severe
injuries can result if the vehicle starts to move!
Secure vehicle against starting up/moving.
WARNING
Injuries due to sharp-edged, falling, swinging, rolling parts!
Wear safety helmet, safety shoes, safety glasses, gloves, and
fall protection.
To Next Page
Loading...
