J.M. Voith SE & Co. KG/VTA | Instruction Manual
Removal
65
-performance universal joint shaft
Instruction manual (Translation)
G853 en 07/2013, Version1
10 Removal
During removal of the universal joint shaft:
Heed additional documentation: (Chapter 1.3, page 8).
Prevent sliding apart of the telescopic length part.
Prevent a tipping over of the flange yoke when loosening the
flange connection.
Only remove universal joint shaft in areas not subject to explosion
(atmosphere).
DANGER
For specially-designed universal joint shafts, improper
installation and removal can cause severe injuries or even
death.
Heed and if necessary request additional documentation
( Chapter 1.3, page 8).
DANGER
Severe to deadly injuries due to rotating parts!
Secure drive against starting up.
Keep personnel who are not participating away, e.g. using
supervisory personnel, enclosures, fences.
DANGER
Severe to deadly injuries due to swinging or falling universal
joint shaft!
Heed common attachment regulations.
Only lift universal joint shaft at the prescribed attachment
points ( Fig. 4.1, page 32).
Do not attach universal joint shaft in marked area
( Fig. 4.1, page 32).
Only use sufficiently dimensioned and tested lifting appliance.
Secure danger zone under the universal joint shaft against
entry.
Wear safety helmet, safety shoes, gloves, safety glasses, and
fall protection.
To Next Page
Loading...
