Declaration of incorporation
J.M. Voith SE & Co. KG /VTA| Instruction Manual
68
-performance universal joint shaft
Instruction manual (Translation)
G853 en 07/2013, Version1
13 Declaration of incorporation
We,
J.M. Voith SE & Co. KG/VTA
Alexanderstraße 2
89510 Heidenheim
hereby declare that the
machine called: High-performance universal joint shaft
in the series S,R,CH,E
corresponds insofar as possible given the scope of delivery to the
essential health and safety requirements as per Annex I of
Directive 2006/42/EC (Machinery Directive).
Other directives and harmonized standards applied, particularly
DIN EN ISO 14121, DIN EN ISO 12100-1, DIN EN ISO 12100-2.
Moreover, we declare that relevant technical information for this
partly completed machinery has been issued as per Annex VII Part
B. We undertake to transmit in response to a reasoned request by
the national authorities, relevant technical information on the partly
completed machinery.
The method of transmission will be agreed with the national
authorities.
You may request the relevant technical information from the
person authorized for technical information at
J.M. Voith SE & Co. KG/VTA
Mrs. Gudrun Mißlbeck
Alexanderstraße 2
89510 Heidenheim
The partly completed machinery must not be put into service until the
final machinery into
which it is to be incorporated has been declared in conformity with the
provisions of Machinery Directive 2006/42/EC, where appropriate.
Making changes to the machinery, unless J.M. Voith SE & Co. KG/VTA
gave their
express written approval, is not permitted.
Heidenheim, July 15, 2013
Dr. Jerry Mackel
Manager of the product group
To Next Page
Loading...
