About this instruction manual
J.M. Voith SE & Co. KG/VTA| Instruction Manual
8
-performance universal joint shaft
Instruction manual (Translation)
G853 en 07/2013, Version1
1.3 Other applicable documents
Documents for all designs
System documentation • System-specific information
about the removal and
installation of the universal joint
shaft.
Operator
Dimensional drawing of the
universal joint shaft
• Dimensions of the connection
flange.
• Tightening torques of the
bolted connections of the
flange connections.
• Weight of the universal joint
shaft.
• Shortest and maximum
permissible length of the
universal joint shaft.
J.M. Voith SE & Co. KG/VTA
Delivery note • Weight of the universal joint
shaft
J.M. Voith SE & Co. KG/VTA
Repair instructions for the
respective designs and sizes
For the manufacturer's authorized
service personnel:
• Information about repair of the
universal joint shaft
J.M. Voith SE & Co. KG/VTA
Balancing instruction For the manufacturer's authorized
service personnel:
• Information about the
balancing of the universal joint
shaft
J.M. Voith SE & Co. KG/VTA
Documents for special designs
Mounting and dismounting
instructions for split flange yokes
For designs with split flange yokes:
• Information about installing and
removing the universal joint
shaft
J.M. Voith SE & Co. KG/VTA
Mounting and dismounting
instructions for tripod center parts
For designs withtripod center parts:
• Information about installing and
removing the universal joint
shaft
Mounting and dismounting
instructions for spring-mounted
center parts
For designs with spring-mounted
center part:
• Information about installing and
removing the universal joint
shaft
J.M. Voith SE & Co. KG/VTA
To Next Page
Loading...
