VOLTWERK VS 3 - Page 116

Voltwerk VS 3, 4, 5 Operating manual 53
7 Maintenance and disassembly
ENGLISH
DO_BA_2008_121LB_3ENG_BVo 22.2.10
1. Unscrew the fan cable connection piece (1).
2. Unscrew the screws (2) on the mounting plate (3).
3. Remove the mounting plate (3) with the fans (4).
4. Replace the mounting plate and fans.
5. Screw on the mounting plate.
6. Tighten the fan cable connection piece.
7. Perform a fan test (see chapter 7.2, page 47).
Result The fans have been replaced.
Replacing fans
(1)
(2) (2)
(3)
(4) (4)