26
VOX Lil' Looper Owner's manual
About the eects
This section explains the eect types that are available
for the eect, and the parameters that can be edited
for these eects.
Please refer to page 7 for details on the signal ow.
EFFECT knob: This is the parameter that you can edit
by turning the EFFECT knob.
EFFECT buon + LOOP LEVEL/VALUE knob: This is
the parameter that you can edit by turning the LOOP
LEVEL/VALUE knob while holding down the EFFECT
buon.
Note:
If the optional VOX VFS2 foot switch is connected
to the EXT.SW jack, it can be used to delete phrases. () p.
29 “Controlling the Lil’ Looper with a foot switch”)
Pedal effects
This models a stomp-box type eect.
COMP
This models a compressor pedal that is popular for its
percussive clean sound. It’s perfect for the pop or funk
music of the 80’s and 90’s. It can also produce a singing,
mellow sustain.
• EFFECT knob: Adjusts the sensitivity.
•
EFFECT buon + LOOP LEVEL/VALUE knob: Adjusts
the output level.
CRUNCH
This models an overdrive unit named aer a half-
human half-horse being from a Greek myth. When the
gain is lowered, this acts as a boost that preserves the
original sound of the guitar. Raising the gain makes this
act as an overdrive with a rich mid-range.
• EFFECT knob: Adjusts the gain.
•
EFFECT buon + LOOP LEVEL/VALUE knob: Adjusts
the output level.
OVERDRIVE
This models a well-known overdrive pedal with a
green box; the inexpressible warmth of its sound has
made it a classic eect.
• EFFECT knob: Adjusts the gain.
•
EFFECT buon + LOOP LEVEL/VALUE knob: Adjusts
the output level.