Vox Lil Looper User Manual

22
VOX Lil' Looper Owner's manual
Blinks red → Lights up → Does not light up: Sync mode
Blinks green → Lights up → Does not light up:
Individual mode
The current mode will be indicated similarly by the blinking
or lighting up of the LEDs when starting the Lil’ Looper.
About the recording time
The Lil' Looper can record 90 seconds of phrases (total)
for Loop 1 and Loop 2. A minimum of ten seconds of
recording time is allocated to each loop.
Loop1 Loop2
90 seconds
For example, suppose that you start from a state in
which neither Loop 1 or Loop 2 contains a phrase, and
record rst Loop 1 and then Loop 2.
You’ll be able to record a maximum of 80 seconds
on Loop 1; i.e., the total recording time of 90 seconds
minus the minimum time for Loop 2, which is 90 - 10
= 80 seconds.
Time recordable on Loop 1
Minimum time recordable on Loop 2: 10 seconds
80 seconds
Aer recording on Loop 1, let’s suppose that you
record on Loop 2.
The available recording time for Loop 2 will be the total
recording time minus the time you recorded on Loop 1.
Loop 1
Time recordable on Loop 2
Now let’s suppose that you subsequently erased the
phrase from Loop 1, and then recorded again on Loop 1.
The available recording time for Loop 1 will be the total
recording time minus the time you recorded on Loop 2.
Loop 2
Time recordable on Loop 1
90 seconds
Overdubbing a performance by playing along
with a recorded phrase
Here we’ll explain how to overdub by playing along
with the phrase you recorded on Loop 1.
1. As desired, you can also adjust the eect
parameters.
) p. 15 “Recording on Loop 1”
2. PresstheLOOP1pedaltoplaybackLoop1.
The Loop 1 PLAY status LED will light-up green.

Vox Lil Looper Specifications

General

Brand	Vox
Model	Lil Looper
Category	Music Pedal
Language	English