Vox Lil Looper User Manual

24
VOX Lil' Looper Owner's manual
Erasing a loop-recorded phrase
Here’s how to erase a phrase that you’ve recorded on a loop.
The erased phrase cannot be recovered. Use this
operation with caution.
Note: If the optional VOX VFS2 foot switch is connected
to the EXT.SW jack, it can be used to delete phrases. ()
p. 29 “Controlling the Lil’ Looper with a foot switch”)
Deleting with a LOOP pedal
You can delete phrases using a LOOP pedal. The pedal
can be used while playing standing up.
1. HolddowntheLOOPpedalwhileaphraseis
playingbackorstoppedaerbeingrecorded.
The PLAY status LED, REC status LED and CLEAR
buon will blink rapidly. If they do not light up, the
phrase has been deleted.
Note: When the LOOP pedal is held down while
stopped, the process for deleting the phrase will
start at the moment the playback sound is output.
Deleting with the CLEAR button
When a phrase exists in only one loop
1. PresstheCLEARbuon.
The phrase will be deleted.
When a phrase is in both loops while recording or
overdubbing one loop
1. PresstheCLEARbuon.
Only the phrase in the loop that’s being recorded or
overdubbed will be deleted.
When a phrase exists in both loops during playback
or while stopped
1. PresstheCLEARbuon.
The CLEAR buon, all PLAY status LEDs and REC
status LEDs will blink.
Note: If you press a buon other than the CLEAR
buon or LOOP buon, the deletion of the phrase
will be canceled.
2. PresstheLOOPpedaloftheloopphrasethatyou
wanttodelete.
The loop phrase of the pedal that was pressed will
be deleted.

Vox Lil Looper Specifications

General

Brand	Vox
Model	Lil Looper
Category	Music Pedal
Language	English