Vox Lil Looper User Manual

8
VOX Lil' Looper Owner's manual
FX: Eect
The eect is used to process the signal from the INPUT
jack.
There are a total of 12 eects. Each eect includes
three eect types. You can select and use one eect
at a time.
Each eect has two adjustable parameters. The
parameters that can be adjusted may vary according
to the eects that are selected.
Loop
Each loop records the signal from the eect. There
are two loops: Loop 1 and Loop 2. You can record
phrases totaling a recording time of 90 seconds for
the two loops.
Metronome
You can use the metronome as a guide while recording
a loop.
If the metronome is on, the Loop Quantize function
will also be activated. This function automatically
corrects the loop-end timing according to the specied
tempo, leing you create phrases that are exactly the
correct length.
When headphones are connected to the HEADPHONES
jack, the metronome sound can only be monitored with
the headphones.
VOX VFS2 (option)
When the optional VOX VFS2 foot switch is connected
to the EXT.SW jack, it can be used to turn the eect on
and o, select the eect type, stop the operation of each
loop separately or delete phrases.
Inserting or Replacing Batteries
The Lil' Looper requires six AA-size baeries. Korg
recommends that you use alkaline (LR6).
Do not combine new and used baeries or dierent
types of baeries.
1. CheckthatallthebuonsandLEDsarenotlitup
andthatthepoweristurnedo.
2. Removethebaerycasecover.
3. Ifthebaeriesareinthecase,removethemfrom
thecase.

Vox Lil Looper Specifications

General

Brand	Vox
Model	Lil Looper
Category	Music Pedal
Language	English