VTech DS6311-2 User Manual

17
Bluetooth
Headset A
paired to base.
Connect now?
Press
SELECT
Pair a headset (continued)
When the handset displays Headset A paired to base.
Connect to headset? Press SELECT, press
MENU/SELECT.
When you already have two devices on the active
devices list, the handset shows Maximum of 2
devices can be connected. You are prompted to
replace an existing device on the active devices list
(page 21).
When you already have one headset on the active
devices list, the handset shows Only 1 headset
can be connected. You are prompted to replace an
existing device on the active devices list (page 21).
When a device is successfully connected, the
handset displays Headset setup completed Device
connected and the corresponding status icon (
1 or
2). The corresponding light (DEVICE1 or DEVICE2)
turns on.
Auto connection
When a device is successfully paired with the telephone
base but not connected, the handset displays Headset
setup completed Device not connected and then Auto-
connect function enabled. Press SELECT. You can
press
MENU/SELECT to enable auto-connection function.
If you do not enable auto-connection function, you can
connect a device manually (page 20).
9.
•
•
10.
Headset setup
completed
Device
connected
The pairing process may take up to one minute. If the pairing process fails,
try again.
If you put the handset back in the telephone base during the pairing
process, the process discontinues and the handset returns to the idle mode.
•
•
Headset setup
completed
Device not
connected
Auto-connect
function
ebabled.
Press
SELECT
18
Bluetooth
Paired devices
All paired devices are stored on the paired devices list. Up to four devices
(one headset only) can be paired with the telephone base.
To use a paired device, it must be connected and on the active devices list
(page 20).
Once you have paired a device with the telephone base, you do not need
to repeat the pairing procedure again unless you delete the device from the
paired devices list.
Rename a paired device
You can change the name of a paired device on the paired
devices list.
Press MENU/SELECT on the handset when it is not
in use.
Press
or to highlight Bluetooth, then press
MENU/SELECT.
Press
or to highlight Paired devices, then press
MENU/SELECT.
Press
or to highlight a selected device when
necessary, then press
MENU/SELECT.
Press
or to highlight Rename, then press
MENU/SELECT softkey. The screen displays
ENTER NEW NAME.
Use the dialing keys to edit the name (see step 6 of
Edit a directory entry on page 48).
Press
MENU/SELECTVQEQPſTO6JGJCPFUGVFKURNC[U
Device renamed.
1.
2.
3.
4.
5.
6.
7.
1PN[VJGſTUVEJCTCEVGTUQHVJGFGXKEGPCOGCTGUJQYPQPVJG
paired devices list.
Ans. system
Directory
Call log
Intercom
Bluetooth
BLUETOOTH
Add cellular
Add headset
Active devices
Paired devices
SELECT DEVICE
Headset A
Cell Phone AC
ENTER NEW NAME
Headset A _
Connect
Rename
Remove paired

VTech DS6311-2 Specifications

General

Brand	VTech
Model	DS6311-2
Category	Cordless Telephone
Language	English