If you do not press any keys after you enter the remote access code, all new
messages play. If there are no new messages, all old messages play.
Once the new messages have played, the telephone announces the help
menu options. If you do not press any key within 20 seconds, the remote
access call automatically disconnects.
When the answering system is turned off, the telephone answers after 10
rings, and announces,
“Please enter your remote access code.”
When the memory is full, the answering system answers incoming calls
after 10 rings and announces,
“Memory is full. Enter the remote access code.”
•
•
•
•
Remote access
A two-digit security code is required to access the answering system
remotely from any touch tone telephone. The preset code is 19. See
Remote code on page 36 to change it.
Dial your telephone number from any touch tone telephone.
When the system plays your announcement, enter the two-digit
security code.
You can also enter one of the following remote commands.
Hang up or press 8 to end the call.
1.
2.
3.
4.
Command Function
1 Play all messages.
2 Play only new messages.
3 Delete the current message (during playback).
33 Delete all old messages.
4 Repeat the current message (during playback).
5 Stop.
*5 Hear a list of remote commands.
6 Skip to the next message (during playback).
*7 Record a new announcement.
8 End the call.
0 Turn the answering system on or off.
66
Appendix
Screen display messages
Already saved
The telephone number entered is already
stored in the directory.
Bluetooth system busy
You are trying to use a handset to make a
CELL call while another handset is already in
CELL call predial mode.
C a ll l o g e m p t y
There are no call log entries.
Calling Handset X
(for models with two or more handsets)
The telephone base or the handset is calling
another handset.
Cell
The CELL line is in use.
C ell c a ll o n h o l d
A call on the CELL line has been put on hold.
Cell line in use
A system handset or the telephone base on
the CELL line is in use.
Charging
The handset with low battery is recharging.
Directory empty
There are no directory entries.
Ended
You have just ended a call.
Handset X is calling
(for models with two or more handsets)
Another system handset is calling.
Home
The HOME line is in use.
Home call answered
The answering system has answered the
incoming HOME call.
Home call on hold
A call on the HOME line has been put on hold
Home & cell calls on hold
Calls on the HOME and CELL lines have been
put on hold.
Home line in use
A system handset, the telephone base or
another telephone on the same HOME line is
in use.
Incoming call
There is an incoming call.
Intercom
The handset or the telephone base is on an
intercom call.
Intercom ended
You have just ended an intercom call.
Appendix
To Next Page
Loading...
Need help?
General
