VTech DS6311-2 User Manual

29
Telephone settings
Dial mode
The dial mode is preset to tone dialing. If you have pulse (rotary) service, you
must change the dial mode to pulse dialing.
To change the setting:
Press MENU/
SELECT on the handset when it is not
in use.
Press or to highlight Settings, then press
MENU/SELECT.
Press
or to highlight Dial mode, then press
MENU/SELECT.
Press
or to choose Tone or Pulse, then press
MENU/SELECTVQEQPſTO
1.
2.
3.
4.
SETTINGS
Clr voicemail
Key tone
Set date/time
Dial mode
DIAL MODE
3To n e
Pulse
30
Telephone settings
Home area code
If you dial your local calls using only seven digits (area code not required),
you can program your home area code so that when you receive a call within
your local area, the telephone number is automatically stored without the
area code in the call log.
To change the setting:
Press MENU/
SELECT on the handset when it is not in use.
Press
or to highlight Directory, then press MENU/SELECT.
Press
or to highlight Home, then press MENU/SELECT.
Press
or to highlight Home area code, then press MENU/SELECT.
Use the dialing keys to enter the desired home area code.
Press MENU/SELECTVQEQPſTO
1.
2.
3.
4.
5.
6.
If, in the future, your telephone service provider requires you to dial the area
code when making a local call, delete the home area code you have already
programmed. After you have deleted the programmed home area code,
___ appears.

VTech DS6311-2 Specifications

General

Brand	VTech
Model	DS6311-2
Category	Cordless Telephone
Language	English