Share an outside call
Another handset can join you on an outside call in a three-way conversation.
That call continues until all people hang up. Up to four handsets can join an
outside call.
Press
/TALK/FLASH on another handset to join the call.
Transfer a call
You can use the intercom feature to transfer an outside call
to another system handset.
When on an outside call, press MENU/
SELECT.
Press
or to highlight Intercom, then press
MENU/SELECT.
If you have a two-handset system, your handset
displays Calling other handset. The destination
handset rings and displays Other handset
is calling.
If you have more than two handsets, your handset
displays INTERCOM TO: and a list of registered
handsets. Press
or to select a destination
handset and then press
MENU/SELECT. Your
handset displays Calling Handset X. The
destination rings and displays Handset X is calling.
When the destination handset answers the intercom call, both screens
show Intercom.
Press OFF/
CLEAR on the originating handset. Both screens show
Intercom ended.
The destination handset screen shows Home call on hold or
Cell call on hold. Press
/TALK/FLASH to answer a home call or
/CELL to answer a cell call.
•
1.
2.
•
•
3.
4.
5.
Use headset
Intercom
Directory
Call log
INTERCOM TO:
Handset 2
Handset 3
Handset 4
Handset 5
If you want to cancel an intercom call and reconnect to the outside call
before the destination handset answers, press /TALK/FLASH on the
originating handset.
If the destination handset does not answer the intercom call within 100
seconds, is in the directory or call log, or is out of range, the originating
handset displays Unable to call try again. Press
/TALK/FLASH on the
originating handset to reconnect to the outside call.
•
•
44
Telephone operation
Directory
Your phone directory consists of a home directory and up to four downloaded
directories. The home directory stores up to 50 entries with up to 30 digits
for each phone number and 15 characters for each name. Each of the
downloaded directory stores up to 1,500 entries with up to 30 digits for each
phone number and 15 characters for each name.
Directory entries are stored at the telephone base and shared by all
system handsets. Any changes made on one handset apply to all.
Only one handset can review the directory at a time. If another handset
tries to enter the directory, its screen shows Not available at this time.
When there are no records in the directory, the screen shows
Directory empty.
When the directory is full and you try to save an entry, the screen shows
List full.
When you try to save a number already stored in the directory, the screen
shows Already saved.
•
•
•
•
•
To Next Page
Loading...
Need help?
General
