VTech DS6311-2 User Manual

41
Telephone operation
Intercom
Use the intercom feature for conversations between two system handsets.
You can buy additional expansion handsets (DS6301) for this telephone
system. You can register up to 12 handsets to the telephone base.
To initiate an intercom call with a handset:
Press MENU/SELECT on the handset when it is not
in use.
Press
or to highlight Intercom, then press
MENU/SELECT.
If you have a two-handset system, your handset
displays Calling other handset. The destination
handset rings and displays Other handset
is calling.
If you have more than two handsets, your handset
displays INTERCOM TO: and a list of registered
handsets. Press
or to select a destination
handset and then press
MENU/SELECT. Your
handset displays Calling handset X. The
destination rings and displays Handset X is calling.
To answer an intercom at the destination handset:
Press
/TALK /FLASH or . Both screens show Intercom.
To silence an intercom call:
Press OFF/
CLEAR or MUTE/REMOVE on the destination handset. Its screen
displays Ringer mute for a few seconds.
To end an intercom call:
Press OFF/
CLEAR or place either handset back in the telephone base or
charger. Both handsets display Intercom ended.
1.
2.
•
•
•
•
•
You can cancel the intercom call before it is answered by pressing
OFF/CLEAR on your originating handset.
If the destination handset does not answer the intercom call within 100
seconds, is in the directory or call log, or is out of range, the originating
handset displays Unable to call try again and returns to the idle mode.
;QWECPWUGCOCZKOWOQHſXGJCPFUGVUCVCVKOG9JGPHQWTJCPFUGVUCTG
used on intercom calls, use another handset for an outside call.
•
•
•
Ans. system
Directory
Call log
Intercom
Bluetooth
INTERCOM TO:
Handset 2
Handset 3
Handset 4
Handset 5
42
Telephone operation
Intercom (continued)
Answer an incoming call during an intercom call
When you receive an incoming home call during an intercom call, there is an
alert tone and Incoming call appears on screens.
Press
/TALK/FLASH to answer the home call and the intercom call ends
automatically.
Press OFF/
CLEAR to end the intercom call with answering the incoming
call. The telephone continues to ring.
When you receive an incoming cell call during an intercom call, there is an
alert tone and Incoming call appears on screens.
Press
/CELL to answer the cell call and the intercom call ends
automatically.
Press OFF/CLEAR to end the intercom call with answering the incoming
call. The telephone continues to ring.
•
•
•
•

VTech DS6311-2 Specifications

General

Brand	VTech
Model	DS6311-2
Category	Cordless Telephone
Language	English