VTech DS6311-2 User Manual

19
Bluetooth
Remove a paired device
If you already have the maximum of four paired devices on the paired devices
NKUVYJGP[QWYCPVVQCFFCPQVJGTFGXKEG[QWOWUVſTUVFGNGVGCRCKTGF
device from the paired devices list.
Press MENU/
SELECT on the handset when it is not
in use.
Press
or to highlight Bluetooth, then press
MENU/SELECT.
Press
or to highlight Paired devices, then press
MENU/SELECT.
Press
or to highlight a selected device when
necessary, then press
MENU/SELECT.
Press
or to highlight Remove paired, then press
MENU/SELECT. The handset displays Remove device
from paired list? Press SELECT.
Press MENU/SELECT VQEQPſTO6JGJCPFUGVFKURNC[U
Device removed from paired list.
1.
2.
3.
4.
5.
6.
Ans. system
Directory
Call log
Intercom
Bluetooth
BLUETOOTH
Add cellular
Add headset
Active devices
Paired devices
SELECT DEVICE
Headset A
Cell Phone AC
Connect
Rename
Remove paired
Remove device
from paired
list?
Press
SELECT
Device removed
fro m
paired list
20
Bluetooth
Active devices
Only devices on the active devices list can establish a Bluetooth connection
with the telephone base. Although two paired devices can be connected to
the telephone base, only one Bluetooth cell phone or a headset can be on a
call at a time.
Review the active devices list
Press MENU/SELECT on the handset when it is not
in use.
Press
or to highlight Bluetooth, then press
MENU/SELECT.
Press
or to highlight Active devices, then press
MENU/SELECT.
Connect/Disconnect an active device
While in the active devices menu, you may connect or
disconnect your active device.
Press MENU/SELECT on the handset when it is not
in use.
Press
or to highlight Bluetooth, then press
MENU/SELECT.
Press
or to highlight Active devices, then press
MENU/SELECT.
Press or to highlight Connect/Disconnect
(whichever applicable) and then press
MENU/SELECT to
EQPſTO6JGJCPFUGVFKURNC[UDevice disconnected.
1.
2.
3.
1.
2.
3.
4.
When your active device is connected, you will be
prompted to select Disconnect. When your active device
is disconnected, you will be prompted to select Connect.
When adding, removing, or replacing a Bluetooth device on the
active devices list, all connected devices will be temporarily disconnected until
the procedure is complete. It may take up to two minutes to reconnect.
Ans. system
Directory
Call log
Intercom
Bluetooth
SELECT DEVICE
1 Headset A
2 Cell Phone AC
Disconnect
Remove active
BLUETOOTH
Download dir
Add cellular
Add headset
Active devices

VTech DS6311-2 Specifications

General

Brand	VTech
Model	DS6311-2
Category	Cordless Telephone
Language	English