VTech DS6311-2 User Manual

39
Telephone operation
Chain dialing
Use this feature to initiate a dialing sequence from numbers stored in the
directory, call log or redial while you are on a call.
Chain dialing can be useful if you wish to access other numbers (such as bank
account numbers or access codes) from the directory, call log or redial list.
To access a number in the directory while on a call:
Press MENU/
SELECT.
Press
or to highlight Directory, then press MENU/SELECT.
Press
MENU/SELECT to select Home directory.
Press
or to scroll to the desired entry or perform an alphabetical
search (page xx).
Press
MENU/SELECT to dial the displayed number.
To access a number in the call log while on a call:
Press MENU/
SELECT.
Press
or to highlight Call log, then press MENU/SELECT.
Press
or to scroll to the desired entry.
Press
MENU/SELECT to dial the displayed number.
To access the redial list while on a call:
Press REDIAL/PAUSE.
Press
, or REDIAL/PAUSE until the desired number displays, then
press
MENU/SELECT. If you do not press MENU/SELECT within two
seconds, the number displayed will be dialed automatically.
1.
2.
3.
4.
5.
1.
2.
3.
4.
1.
2.
You cannot edit a directory entry while on a call. For more details about the
directory, see page 44.
You cannot copy a call log entry into the directory while on a call. For more
details about call log, see page 51.
You can only view the numbers in the directory, call log or redial while on a
call and cannot erase any entries.
Press and hold OFF/
CLEAR to exit redial, directory or call log while on a call.
•
•
•
•
40
Telephone operation
Redial list
The redial list stores up to 20 most recently dialed numbers.
When there are already 20 entries, the oldest entry is deleted to make room
for the new entry. Entries are shown in reverse chronological order.
Review the redial list
Press REDIAL/PAUSE when the handset is not in use.
Press
, or REDIAL/PAUSE to browse. You hear a
double beep when you reach the beginning or end of the
redial list.
Dial a redial entry
Press REDIAL/PAUSE when the handset is not in use.
Press , or REDIAL/PAUSE to browse until the desired number displays.
Press /TALK/FLASH or to use the home line.
- OR -
Press /CELL to use the cell line.
Press
MENU/SELECT to dial the displayed number. If you do not press
press
MENU/SELECT within two seconds, the number displayed will be
dialed automatically.
Save a redial entry to the directory
Press REDIAL/PAUSE when the handset is not in use.
Press , or REDIAL/PAUSE to browse until the desired number displays.
Press MENU/SELECT twice.
The handset displays ENTER NUMBER. Use the dialing keys to edit the
number, if necessary.
Press MENU/
SELECT to move to the name.
The handset displays ENTER NAME. Use the dialing keys to enter a
name (see step 6 of Create a new directory entry on page 45).
Press
MENU/SELECT and then Saved displays.
Delete a redial entry
Press REDIAL/PAUSE when the handset is not in use.
Press , or REDIAL/PAUSE to browse until the desired number displays.
Press MUTE/REMOVE to delete the displayed number.
1.
2.
1.
2.
3.
4.
1.
2.
3.
4.
5.
6.
7.
1.
2.
3.

VTech DS6311-2 Specifications

General

Brand	VTech
Model	DS6311-2
Category	Cordless Telephone
Language	English