Make, answer or end a home call
Using a handset:
To make a home call:
Press /TALK/FLASH or , then enter the
telephone number.
To predial a home call:
Enter the telephone number, then press
/TALK/FLASH or .
To answer a home call:
Press /TALK/FLASH or .
To end a home call:
Press OFF/
CLEAR or put the handset in the telephone base.
Using a Bluetooth headset:
You can use a Bluetooth headset on home calls. However, you will need to stay
within 30 feet from the telephone base to maintain the Bluetooth signal.
To switch between the headset and handset while on a call:
Press MENU/
SELECT.
Press
MENU/SELECT to select Use headset/Use handset (whichever
applicable).
To answer a home call:
Press the call button on your headset.
To end a home call:
Press the call button on your headset if you are using it or press
OFF/
CLEAR on the handset.
•
•
•
•
1.
2.
•
•
The screen shows the elapsed time as you talk (in
hours, minutes and seconds).
When predialing (preview numbers before dialing), press
MUTE/REMOVE
or OFF/CLEAR to backspace and delete; press and hold REDIAL/PAUSE to
insert a dialing pause (a p appears).
•
•
Telephone operation
While you are using your Bluetooth headset and you move too far away from
the telephone base or the battery of your headset is fully depleted, the call will
be transferred to the originating handset automatically.
34
Telephone operation
Call waiting on the home line
If you subscribe to call waiting service with your telephone service provider,
you hear a beep if someone calls while you are already on a call.
Press /TALK /FLASH on the handset to put your current call on hold and
take the new call.
Press
/TALK /FLASH on the handset at any time to switch back and forth
between calls.
Make, answer or end a cell call
You can connect a maximum of two Bluetooth enabled cell phones to the
telephone base, but only one cell phone can be used on a cell call at a time.
If you have only one cell phone connected to the telephone base and is on
the active devices list, it is automatically selected to make or answer cell calls.
If you have two cell phones connected to the telephone base and are on the
active devices list, the telephone system prompts you to select a cell phone
before you make a cell call.
To make a cell call:
Enter the telephone number, then press
/CELL.
To answer a cell call:
Press /CELL.
To end a cell call:
Press OFF/CLEAR or put the handset in the telephone base.
Call waiting on the cell line
If you subscribe to call waiting service with your cell phone service provider,
you hear a beep if someone calls while you are already on a call.
Press /CELL on the handset to put your current call on hold and take
the new call.
Press
/CELL on the handset at any time to switch back and forth
between calls.
•
•
•
•
•
•
•