Call screening
The call screening feature lets you listen to a caller leaving a message at the
telephone base. You may turn this feature on or off with a system handset.
To change the setting:
Press MENU/
SELECT on the handset when it is not
in use.
Press or to highlight Ans. system, then press
MENU/SELECT.
Press
or to highlight Ans sys setup, then press
MENU/SELECT.
Press
or to highlight Call screening , then press
MENU/SELECT.
Press
or to choose On or Off, then press
MENU/SELECTVQEQPſTO
1.
2.
3.
4.
5.
ANS. SYSTEM
Play messages
Delete all old
Record memo
Ans sys setup
ANS SYS SETUP
Answer ON/OFF
Call screening
Announcement
# of rings
CALL SCREENING
3On
Off
34
Answering system settings
Announcement
The telephone is preset with a greeting that answers calls with
“Hello, please
leave a message after the tone.”
You can use this preset announcement, or
replace it with your own.
Play your announcement
Press MENU/SELECT on the handset when it is not
in use.
Press
or to highlight Ans. system, then press
MENU/SELECT.
Press
or to highlight Ans sys setup, then press
MENU/SELECT.
Press
or to highlight Announcement, then press
MENU/SELECT.
The handset announces,
“To play, press 2. To record,
press 7.”
Press 2 to play.
Record your own announcement
Press MENU/SELECT on the handset when it is not
in use.
Press
or to highlight Ans. system, then press
MENU/SELECT.
Press
or to highlight Ans sys setup, then press
MENU/SELECT.
Press
or to highlight Announcement, then press
MENU/SELECT.
The handset announces,
“To play, press 2. To record,
press 7.”
Press 7 to record.
The handset announces, “Record after the tone. Press
5 when you are done.” After the tone, speak towards
the microphone of the handset.
Press 5YJGP[QWſPKUJTGEQTFKPI
The handset automatically plays back the newly recorded announcement.
Press 5 to stop the playback at any time; 2 to replay the recorded
announcement; or 7 to record again if desired.
1.
2.
3.
4.
5.
1.
2.
3.
4.
5.
6.
7.
8.
Your announcement can be up to 90 seconds in length.
Announcements shorter than two seconds will not be recorded.
•
•
ANNOUNCEMENT
2-Pla y
3-Delete
5-Stop
7-Record
ANS SYS SETUP
Answer ON/OFF
Call screening
Announcement
# of rings
Recording
announcement...
5-Stop
Announcement
play b a c k