VTech DS6311-2 User Manual

35
Answering system settings
Delete your announcement
Press MENU/SELECT on the handset when it is not
in use.
Press or to highlight Ans. system, then press
MENU/SELECT.
Press
or to highlight Ans sys setup, then press
MENU/SELECT.
Press
or to highlight Announcement, then press
MENU/SELECT.
The handset announces,
“To play, press 2. To
record, press 7.”
Press 3 to delete your own
recorded announcement. The handset announces,
“Announcement deleted.”
Number of rings
When the answering system is turned on, it answers all incoming home calls
after the number of rings set. You can choose from two, four, or six rings; or
toll saver. With toll saver selected, the answering system answers after two
rings when you have new messages, and after four rings when you have
no new messages. This enables you to check for new messages and avoid
paying unnecessary long distance charges if you are calling from out of your
local area.
To change the setting:
Press MENU/
SELECT on the handset when it is not
in use.
Press
or to highlight Ans. system, then press
MENU/SELECT.
Press
or to highlight Ans sys setup, then press
MENU/SELECT.
Press
or to highlight # of rings, then press
MENU/SELECT.
Press
or to choose from 2, 4, 6 or Toll saver, then
press
MENU/SELECT VQEQPſTO.
1.
2.
3.
4.
5.
1.
2.
3.
4.
5.
When your announcement is deleted, calls are answered with the preset
announcement.
ANNOUNCEMENT
2-Pla y
3-Delete
5-Stop
7-Record
ANS SYS SETUP
Answer ON/OFF
Call screening
Announcement
# of rings
ANS SYS SETUP
Answer ON/OFF
Call screening
Announcement
# of rings
# OF RINGS
32
4
6
Toll saver
36
Answering system settings
Remote access code
A two-digit security code is required to access the answering system
remotely from any touch tone telephone. The preset code is 19. You can
change the code to any number from 10 to 99.
To change the setting:
Press MENU/
SELECT on the handset when it is not
in use.
Press or to highlight Ans. system, then press
MENU/SELECT.
Press
or to highlight Ans sys setup, then press
MENU/SELECT.
Press
or to highlight Remote code, then press
MENU/SELECT.
Use the dialing keys (0-9) to enter a two-digit number
from 10-99, then press
MENU/SELECT VQEQPſTO.
Press
MUTE/REMOVE to erase a digit.
Press and hold MUTE/REMOVE to erase the entire number.
Press to move the cursor to the right or to the left.
Message alert tone
When the answering system is turned on, the telephone beeps every
10 seconds to alert you of new messages. The tone stops when all new
messages have been reviewed. The message alert tone is preset to off.
To change the setting:
Press MENU/
SELECT on the handset when it is not
in use.
Press or to highlight Ans. system, then press
MENU/SELECT.
Press
or to highlight Ans sys setup, then press
MENU/SELECT.
Press
or to highlight Remote code, then press
MENU/SELECT.
Press
or to choose from On or Off, then press
MENU/SELECT VQEQPſTO.
1.
2.
3.
4.
5.
•
•
•
1.
2.
3.
4.
5.
The answering system must be turned on for the message alert tone
to function.
ANS SYS SETUP
Call screening
Announcement
# of rings
Remote code
REMOTE CODE
19
ANS SYS SETUP
Announcement
# of rings
Remote code
Msg alert tone
MSG ALERT TONE
3On
Off

VTech DS6311-2 Specifications

General

Brand	VTech
Model	DS6311-2
Category	Cordless Telephone
Language	English