WABCO OptiTire - Installation; Safety Information

41
Installation
7 Installation
In this chapter you will learn how the OptiTire is installed your vehicle.
Observe all safety instructions when carrying out assembly work on the vehicle.
WABCOBridgecongurator
– Open the myWABCO website:
https://www.am.wabco-auto.com/de/mywabco/welcome/
Help on logging in can be obtained by pressing the Step-by-step instructions button.
After the successful registration you can use the online congurator WABCO Bridge via
myWABCO to carry out your own conguration of the OptiTire system.
Please contact your WABCO partner if you have any questions.
7.1 Safety information
– Observe the occupational health and safety regulations of the respective country, the workshop as
well as the vehicle manufacturer's instructions.
WARNING
Risk of accident due to loose wheel nuts
Loose wheel nuts may lead to accidents when driving on roads.
– Wheel nuts must be tightened with torque specied by vehicle manufacturer.
– Check the tightness of the wheel nuts after 500 km.
WARNING
Risk of accident due to unsecured vehicle
Vehicles not secured may roll away during the assembly. This might lead to severe injuries or even
death.
– Secure the vehicle against rolling away before carrying out work on the vehicle.
CAUTION
Danger to health due to dust
Dusts that are dangerous to health are generated when the rim is cleaned using compressed air.
– Do not clean the rims using compressed air.