Maintenance CT 36 / CT 48
wc_tx000374gb.fm 42
4.3 Engine Oil - Honda
See Graphic: wc_gr002381
4.3.1 Drain oil while the engine is still warm.
4.3.2 Remove the oil fill plug (a) and drain cap (b) to drain oil.
Note: In the interests of environmental protection, place a plastic sheet
and a container under the machine to collect any liquid which drains
off. Dispose of this liquid in accordance with environmental protection
legislation.
4.3.3 Install drain cap.
4.3.4 Fill the engine crankcase with recommended oil up to the level of the
plug opening (c). See Technical Data for oil quantity and type.
4.3.5 Install the oil filler plug.
To Next Page
Loading...
Need help?
General
