EasyManuals Logo

Wacker Neuson CT 48 Repair Manual

Wacker Neuson CT 48
118 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #43 background imageLoading...
Page #43 background image
CT 36 / CT 48 Maintenance
wc_tx000374gb.fm 43
4.4 Engine Oil - Wacker
See Graphic: wc_gr003201
4.4.1 Drain oil while engine is still warm.
Note: In the interests of environmental protection, place a plastic sheet
and a container under the machine to collect any liquid which drains
off. Dispose of this liquid in accordance with environmental protection
legislation.
4.4.2 Remove the oil drain cap (a).
4.4.3 Allow the oil to drain.
4.4.4 Install the drain cap.
4.4.5 Fill the engine crankcase through the oil filler opening (b), to the upper
mark on the dipstick (c). Do not thread in the dipstick to check the level.
See Technical Data for oil quantity and type.
4.4.6 When the crankcase is full, reinstall the dipstick.
wc_
g
r003201
c
b
a

Table of Contents

Other manuals for Wacker Neuson CT 48

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Wacker Neuson CT 48 and is the answer not in the manual?

Wacker Neuson CT 48 Specifications

General IconGeneral
BrandWacker Neuson
ModelCT 48
CategoryTrowels
LanguageEnglish

Related product manuals