Wacker Neuson CT 48 Repair Manual

CT 36 / CT 48 Maintenance
wc_tx000374gb.fm 49
4.11 Carburetor Adjustment - Honda
See Graphic: wc_gr0001061
Remove the drive belt before making any adjustment to the carburetor.
See Belt Replacement. The blades will engage unless the belt is
removed from the machine.
The pilot screw (a) is fitted with a limiter cap to prevent excessive
enrichment of the air-fuel mixture in order to comply with emission
regulations. The mixture is set at the factory and no adjustment should
be necessary. Do not attempt to remove the limiter cap. The limiter cap
cannot be removed without breaking the pilot screw.
WARNING
wc_gr001061
a

Wacker Neuson CT 48 Specifications

General

Brand	Wacker Neuson
Model	CT 48
Category	Trowels
Language	English