13
GM 5000EA
C
US
OPERATING MANUAL
EDITION 04/2016 ORDER NUMBER DOC2344499
3 IDENTIFICATION
3.1 EXPLOSION PROTECTION IDENTIFICATION FM
This device has been manufactured and tested by FM, according to the FM (Factory Mutual)
standard "Class Number 7260" (Approval Standard for Electrostatic Finishing Equipment).
All tested combinations of devices including accessories are given in the FM Control
Document with part number 2316160.
Temperature notes
- Maximum surface temperature: 85 °C; 185 °F
- Maximum permissible product temperature: 50 °C; 122 °F
- Permissible ambient temperature: 0 to +40 °C; +32 to +104 °F
For electrostatic nishing applications using class I,
group D, spray product
In accordance with document 2316160
Cable connections
Only cable assigned to the device may be used (see Chapter 13).
Permissible Device Combinations
The GM 5000EA manual spray gun may only be connected to the control units listed below:
- VM 500 control unit (USA)
- VM 5000 control unit (USA)
Incorrect use!
Risk of injury and damage to the device.
Connect the GM 5000EA manual spray gun only to original
WAGNER control units.
WARNING
To Next Page
Loading...
