62
GM 5000EA
OPERATING MANUAL
EDITION 04/2016 ORDER NUMBER DOC2344499
10.3 DISMANTLING OF THE GUN
10.3.1 TOOLS
For disassembling and assembling the spray gun, the following tools are required:
- Allen wrench SW 2
- Allen wrench SW 3
- Allen wrench SW 5
- Wrench size 5
- Wrench size 6
- Wrench size 8
- Wrench size 11
- Wrench size 12
- Wrench size 14
- Wrench size 19
- Ring spanner SW9
- Ring spanner SW11
- Torx
wrench 20
- Torx wrench 25
- Slide gauge
- Valve needle assembly tool, Order No. 2309368
- Clamping screw assembly tool, Order No. 2325263
Only as required:
- Handle seal assembly tool (Order No. 2342334, not included in scope of delivery)
Plastic parts
Gently handle all plastic parts.
Brand notice:
The brands speci ed in this document are property of the respective owners. Loctite®, for
example, is a registered brand of Henkel.
To Next Page
Loading...
