37
GM 5000EA
OPERATING MANUAL
EDITION 04/2016 ORDER NUMBER DOC2344499
6.5.3 AIR SUPPLY
6.5.4 PRODUCT SUPPLY
The use of an air lter with air regulator (4) ensures that only dry, clean atomizing air gets
into the spray gun. Dirt and moisture in the atomizing air worsens the spraying quality and
spraying pattern.
Impurities in the spraying system!
Spray gun blockage, products harden in the spraying system.
Flush the spray gun and paint supply with a suitable ushing agent.
NOTICE
Bursting hose, bursting threaded joints!
Danger to life from injection of product.
Ensure that the hose material is chemically resistant to the
sprayed products.
Ensure that the spray gun, threaded joints and product hose
between the device and the spray gun are suitable for the
pressure generated in the device.
Ensure that the following information can be seen on the high-
pressure hose:
- Manufacturer
- Permissible operating pressure
- Date of manufacture.
DANGER
Hose connections!
Risk of injury and damage to the device.
Do not exchange hose connections of product hose and air
hose.
WARNING
To Next Page
Loading...
