28
GM 5000EA
B_03446
OPERATING MANUAL
EDITION 04/2016 ORDER NUMBER DOC2344499
5.5 SPRAYING PROCEDURE
Spray pattern
Union nut
Spray product
Atomizing air
Advantages
- Thin layers
- Uniform coating thickness
- Perfect nish
In this process, the spray product is fed to the nozzle with a pressure of approx. 0.05–0.2 MPa; 0.5–2 bar;
7–29 psi. The atomizing air at approx. 0.25 - 0.4 MPa; 0.25 - 4 bar; 36 - 58 psi produces a soft round jet, which
largely eliminates the problem of overlapping boundaries. There are various nozzles and air caps available as
accessories for the respective spray product and the discharge quantities.
5.5.1 SPRAYING PROCEDURE FOR ROUND JET AIR ATOMIZING
To Next Page
Loading...
