46
GM 5000EA
1
2
4
11
10
12
13
14
10
3
5
9
6
6
7
8
8
15
B_03233
P
ZL
L
FL
P
MAT
OPERATING MANUAL
EDITION 04/2016 ORDER NUMBER DOC2344499
7.3 WORKING
1. Provide an empty tank for return (13).
2. Put the tank with working material into the pressure tank (1) and close the pressure
tank.
3. Open stop valve (2).
4.
Adjust to approx. 0.05 to 0.15 MPa; 0.5 to 1.5 bar; 7 to 22 psi on the pressure regulator (3).
5. Point the gun, without nozzle, into tank (13) and open it.
6. Close stop valve (2) as soon as pure working material without any air inclusions starts
coming from the gun.
7. Close the spray gun if the pressure tank is depressurised.
8. Dispose of the contents of the tank (13) according to the local regulations.
7.3.1 FILLING WITH WORKING MATERIAL
Ensure that:
the regular safety checks are carried out in accordance with Chapter 8.2.3,
commissioning is carried out in accordance with Chapter 6.7.
Example:
Spraying system with pressure tank
To Next Page
Loading...
