49
GM 5000EA
B_06064
≤ 90°
OPERATING MANUAL
EDITION 04/2016 ORDER NUMBER DOC2344499
Adjustable EARV5000 round jet nozzle
By turning the union nut the spray pattern can be adjusted to suit the object being
sprayed. The illustration shows the in uence of the turning on the spraying pattern.
1. Set the union nut as far as the stop.
2. Open maximum 1/4 turn. The atomizing is good in this area.
The union nut should not protrude beyond the nozzle body.
Always fully open the air regulation.
Low viskosity, diameter big
Low viskosity, diameter small
High viskosity, diameter big
High viskosity, diameter small
Spray pattern
Marking on union nut
To Next Page
Loading...
