WAGNER PC 1025 PRO - Page 49

49
PC 1025 PRO
EN
3. Guarantee procedure
If the equipment is found to be defective in performance dur-
ing the guarantee period, the buyer shall immediately claim
on the guarantee.
Remarks: The buyer, after receiving the equipment, shall im-
mediately inspect the equipment thoroughly, and, within 14
days from the date of receiving the equipment, contact (1)
Wagner’s authorised dealer, or (2) WAGNER, submit the guar-
antee claim, and, at the same time, provide relevant informa-
tion to eectively protect their guarantee rights.
Address of Wagner Technical Support and Service Centre:
J. Wagner GmbH
Otto-Lilienthal-Straße 18
D-88677 Markdorf
Germany
Technical Support and Service Hotline:
+49 / 75 44 / 505-1520
email: Technical.Support-DF@wagner-group.com
Customer Service Hotline:
+49 / 75 44 / 505-1666
email: kundenzentrum@wagner-group.com
The product and the original purchase document indicating
the purchase date, name, and serial number shall be delivered
for repair, with transportation costs paid by the customer.
The costs for delivery to the repair centre or back to the cus-
tomer and the risk of product loss or damage shall be borne
by the customer.
4. Exclusion of guarantee
Standard guarantee claims cannot be considered
• for parts that are subject to wear and tear due to use
or other natural wear and tear, as well as defects in the
product that are a result of natural wear and tear, or wear
and tear due to use. This includes in particular cables,
valves, packaging, jets, cylinders, pistons, uid wetted
parts, lters, pipes, seals, rotors, stators, tips, etc. Dam-
age due to wear and tear that is caused in particular by
sanded coating materials, such as dispersions, plaster,
putty, adhesives, glazes, quartz foundation.
• for the clutch assembly on a gas sprayer or striper.
• in the event of errors in devices that are due to non-
compliance with the operating instructions, unsuitable
or unprofessional use, incorrect assembly and/or com-
missioning by the buyer or by a third party, or utilization
other than is intended, abnormal ambient conditions,
unsuitable coating materials, unsuitable operating
conditions, operation with the incorrect mains voltage
supply/frequency, over operation or defective servicing
or care and/or cleaning.
• for errors in the device that have been caused by using
accessory parts, additional components or spare parts
that are not original WAGNER parts.
• for products to which modications or additions have
been carried out.
• for products where the serial number has been removed
or is illegible.
• for products to which attempts at repairs have been car-
ried out by unauthorized persons.
• for products with slight deviations from the target prop-
erties, which are negligible with regard to the value and
usability of the device.
• for products that have been partially or fully taken apart.
5. Additional regulations.
If the check shows that the case is not a guarantee case, re-
pairs are carried out at the expense of the buyer.
The above regulations manage the legal relationship to us
with reference to WAGNER Standard Guarantee.
Any additional claims, in particular for damages and losses of
any type, which occur as a result of the customer’s improper
use of our products, are excluded from our product liability,
unless otherwise stipulated by law or regulations. In addition,
any claims for any losses, which are not caused directly from
the products or the use of the products are also excluded
from our product liability, unless otherwise stipulated by law
or regulations.
Claims for liability for defects to the distributors remain unaf-
fected.
The contractual language is English. In the event that the
meaning of the English and a foreign text of this guarantee
deviate from one another, the meaning of the English text has
priority. WAGNER Decorative Finishing reserves the right of -
nal explanation.
Subject to modications
GUARANTEE DECLARATION