WAGNER PEM-X1 CG - Page 23

23
VERSION 05/2019
ORDER NUMBER DOC2326960
PEM-X1 CG
Application Distance to
work piece
(mm)
Powder
discharge
(g/min)
Nozzle
Universal
120 … 300 50 … 300
P_01664
– Deep and complex part
geometries
– Extensive work pieces
The spray width can be adjusted by the sliding ring.
P_03821
Rear sliding ring
Wide cloud
Cloud opening angle approx. 80°
P_03822
Front sliding ring
Narrow cloud
Cloud opening angle approx. 60°
P_03823
Front sliding ring, turned by 90°
Extra narrow cloud
Cloud opening angle approx. 40°
Application Distance to work piece
(mm)
Deector cone
R18
P_01665
18 mm 100 … 300
– Smaller at parts
R25
P_01666
25 mm 100 … 300
– Medium sized at parts
R34
P_01667
34 mm 100 … 300
– Large at parts