47
VERSION 05/2019
ORDER NUMBER DOC2326960
PEM-X1 CG
8.8 ASSEMBLY OF THE CORONASTAR
The CoronaStar is a retrot set for the manual gun, which helps to achieve a better
surface quality (e.g., reduction of "orange peel").
WARNING
Danger from electric current!
Risk of injury and damage to the device.
The conversion on the CoronaStar may only be carried out by trained personnel.
Prior to assembling the CoronaStar, the high voltage and powder feed must be
switched o and secured against being inadvertently switched on.
Procedure:
1. Guide plug-in contact 1 of CoronaStar into drilled
hole B on hook.
1
2
B
±90°
P_01729
2. Attach clip 2 of CoronaStar to housing.
Flexible positioning in a range of ± 90° is possible.
To Next Page
Loading...
