WAGNER PEM-X1 - Page 23

23
PEM-X1
P_01665
P_01666
P_01667
OPERATING MANUAL
VERSION 03/2014 ORDER NUMBER DOC 2326020
De ector cone Application Distance to work piece
(mm)
R18
100 ... 300
18 mm
Smaller  at parts
R25
100 ... 300
25 mm
Medium sized  at parts
R34
100 ... 300
34 mm
Large  at parts
Output quantity [g/min]
Overall air
Feed air [%] 4.00 Nm³/h 5.00 Nm³/h 6.00 Nm³/h
50 140 170 210
60 200 240 260
70 250 270 300
80 300 320 350
90 330 360 380
100 370 400 420
The values have been determined by means of an PI-F1 injector and a powder hose
11mm,
length 5m.
These values have to be considered as reference values and depend on the characteristics
of the powder and the status of the transport relevant pieces (e.g., injector).