11
PEM-X1
0102
OPERATING MANUAL
VERSION 03/2014 ORDER NUMBER DOC 2326020
3 IDENTIFICATION
3.1 EXPLOSION PROTECTION IDENTIFICATION
The EC type examination certi cate PTB 12 ATEX 5002 can be found in Chapter 14.4.
3.2 PERMISSIBLE DEVICE COMBINATIONS
Gun type: PEM-X1
Manufacturer: J. Wagner AG
CH - 9450 Altstätten
II 2 D 2mJ 85 °C
CE: European Communities
0102: Number of noti ed body which issues the recognition of quality
assurance in production
Ex: Symbol for explosion protection
II: Device class II
2: Category 2
D: Ex-atmosphere dust
2mJ: Maximum ignition energy 2 mJ
85 °C: Maximum surface temperature
Incorrect use!
Risk of injury and damage to the device.
Only connect original Wagner devices to the PEM-X1 powder
spray gun.
WARNING
The PEM-X1 powder spray gun may only be connected to the control devices listed below:
EPG-Sprint X with the corresponding PI-F1/HiCoat ED-F powder injector
EPG-Sprint with the corresponding PI-F1/HiCoat ED-F powder injector*
EPG S2 with the corresponding PI-F1/HiCoat ED-F powder injector*
* The remote control function of the PEM-X1 spray gun is not available when using these
control units.
Permissible device combinations for the USA and Canada, see Chapter 14.5 "FM Approval".
To Next Page
Loading...
