To Next Page
M
Michael TrujilloAug 16, 2025
What to do if the powder outlet is uneven on my WAGNER PEM-X1?
- DDavid JensenAug 16, 2025
Uneven or inadequate powder output from your WAGNER Paint Sprayer can result from several factors. Here's what to check: * **Contamination:** Blow through the powder feeding parts to remove any blockages. * **Powder Sintering:** Clean the powder feeding parts to eliminate any hardened powder. * **Collector Nozzle Contamination:** Thoroughly clean the cup gun. * **Incorrect Air Ratio:** Adjust the feed air/dosing air ratio at the control module or unit. * **Worn Collector Nozzle:** Replace the collector nozzle.
General
