Operating manual Manual powder spray gun PEM-X1
7 Operation
30 Order number 2326020 | Edition 10/2022
ð If a prompt for pressure relief is given.
ð If coating work is interrupted or stopped.
ð Before the device is externally cleaned, checked or serviced.
ð Before the spray nozzle is installed or cleaned.
7.8 REPRODUCIBLE SETTING OF THE NOZZLE POSITION
An adjustment tool is provided for the flat jet nozzle.
It permits turning the flat jet nozzle without damaging the electrodes and without removing
the union nut.
The union nut only has to be slackened.
To Next Page
Loading...
