Operating manual Manual powder spray gun PEM-X1
10 Inspections in Accordance with DIN EN 50050-2: 2013
44 Order number 2326020 | Edition 10/2022
10 INSPECTIONS IN ACCORDANCE WITH DIN EN 50050-2:
2013
If the system is used for electrostatic coating with ignitable coating powders, the test must be
performed in accordance with DINEN50050-2: 2013 according to the following Overview
Table [8
45].
10.1 ABBREVIATIONS
ER Employer FT Function test
SP Skilled person ME Measurement
FPE Fire protection engineer SI Standard inspection
QEW Electrician VI Visual inspection
MFR Manufacturer CM Continuous monitoring
TP Trained person TI Technical inspection
To Next Page
Loading...
