WAGNER PEM-X1 - Powder Cup

Operating manual Manual powder spray gun PEM-X1
6 Assembly and Commissioning
Order number 2326020 | Edition 10/2022 23
Deflector cone Application Distance to work piece (mm)
R18
P_01665
⌀ 18 mm
Smaller flat parts
100 – 300
R25
P_01666
⌀ 25 mm
Medium sized flat parts
100 – 300
R34
P_01667
⌀ 34 mm
Large flat parts
100 – 300
Feed air [%] Discharge quantity [g/min]
for total air
4.00 Nm
3
/h 5.00 Nm
3
/h 6.00 Nm
3
/h
50 140 170 210
60 200 240 260
70 250 270 300
80 300 320 350
90 330 360 380
100 370 400 420
The values have been determined by means of a PI-F1 injector and a powder hose ⌀ 11 mm,
length 5m.
These values have to be considered as reference values and depend on the characteristics of
the powder and the status of the transport relevant pieces (e.g., injector).