WAGNER PEM-X1 - Changing the Round Jet Nozzle; Removing the Round Jet Nozzle

Operating manual Manual powder spray gun PEM-X1
8 Cleaning and Maintenance
Order number 2326020 | Edition 10/2022 35
8.4.2 Fitting the Flat Jet Nozzle
2.
4.
3.
P_04983
1. Before inserting the electrode holder, the spring contact of the gun body and contact
surface of the electrode holder should be checked.
The spring contact must be clean and move easily, the gun body must also be clean
and free of powder deposits.
2. Insert electrode holder into gun housing.
3. Attach flat jet nozzle to electrode holder and attach union nut.
4. Screw union nut onto gun housing until flat jet nozzle can no longer be turned by
hand.