Operating manual Powder Cup Gun PEM-X1 CG
11 Disassembly and Disposal
Order number 2326960 | Edition 10/2022 47
11 DISASSEMBLY AND DISPOSAL
11.1 DISASSEMBLY
WARNING
Incorrect disassembly!
Risk of injury and damage to the device.
4 Before starting disassembly:
4 Switch off the energy and compressed air supply.
4 Ensure the grounding of all system components.
4 Secure system against being switched back on without authorization.
4 Observe the operating manuals when carrying out all work.
1. Switch off the system.
2. Lock the compressed air supply and decompress system.
3. Disconnect the gun connection cable from control unit.
4. Disconnect the hose for feed air, dosing air and atomizing air from the spray gun and
from the control unit.
11.2 DISPOSAL
NOTICE
Do not dispose of used electrical equipment with household refuse!
In accordance with European Directive 2012/19/EU on the disposal of used electrical
equipment and its implementation in national law, this product may not be disposed of
with the household refuse, but must be recycled in an environmentally correct manner.
4 WAGNER or one of our dealers will take back your used WAGNER electric or
electronic equipment and will dispose of it for you in an environmentally-friendly
way.
4 Please contact one of our service points, one of our representatives or us directly.
To Next Page
Loading...
Need help?
General
