Operating manual Manual powder spray gun PEM-X1
3 Identification
Order number 2326020 | Edition 10/2022 11
3.4 PERMISSIBLE DEVICE COMBINATIONS
WARNING
Incorrect use!
Risk of injury and damage to the device.
4 Only connect the powder spray gun to original WAGNER devices.
Only use the PEM-X1 manual powder spray gun with the following control units:
Guns Control units
PEM-X1 EPG-Sprint X with the corresponding PI-F1/
HiCoat ED-F powder injector*
EPG-Sprint XE with the corresponding PI-F1/
HiCoat ED-F powder injector*
EPG-Sprint with the corresponding PI-F1/HiCoat
ED-F powder injector*
EPG S2 with the corresponding PI-F1/HiCoat ED-
F powder injector*
* The remote control function of the PEM-X1 spray gun is not available when using these
control units.
To Next Page
Loading...
