WAGNER PEM-X1 - Table of Contents

Operating manual Manual powder spray gun PEM-X1
Table of Contents
Order number 2326020 | Edition 10/2022 3
TABLE OF CONTENTS
1 About these Instructions 6
1.1 Preface 6
1.2 Warnings, Notices and Symbols in these Instructions 6
1.3 General Characters and Symbols 6
1.4 Languages 7
1.5 Abbreviations 7
1.6 Terminology for the Purpose of this Manual 7
2 Using in Accordance with the Instructions 9
2.1 Device Type 9
2.2 Type of Use 9
2.3 For Use in Potentially Explosive Areas 9
2.4 Processible Working Materials 9
2.5 Misuse 9
3 Identification 10
3.1 Explosion Protection Identification 10
3.2 FM approval 10
3.3 Type Plate 10
3.4 Permissible device combinations 11
4 Basic Safety Instructions 12
4.1 Safety Instructions for the Operator 12
4.1.1 Electrical Devices and Equipment 12
4.1.2 A Safe Work Environment 12
4.1.3 Personnel Qualifications 13
4.2 Safety Instructions for the Personnel 13
4.2.1 Personal Safety Equipment 13
4.2.2 Safe Handling of WAGNER Powder Spray Devices 14
4.2.3 Grounding the Device 14
4.2.4 Product Hoses 14
4.2.5 Electrical Connection Cables 15
4.2.6 Cleaning and Flushing 15
4.2.7 Maintenance and Repair 15
4.2.8 Protective and Monitoring Equipment 16
4.3 Information about safe discharges 16
5 Description 18
5.1 Design of the Manual Gun 18
5.2 Mode of Operation of the Manual Gun 18
5.3 Extent of Delivery 18
5.4 Data 19
5.4.1 Technical Data 19
5.4.2 Dimensions 20
5.5 Accessories 20
6 Assembly and Commissioning 21
6.1 Training of Assembly/Commissioning Personnel 21
6.2 Storage Conditions 21
6.3 Installation Conditions 21
6.4 Preparation of the Spray Gun 21
6.4.1 Selection of a Suitable Nozzle System 21
6.5 Connecting the Manual Gun 24